DTC C1A10: Front Radar Sensor [08/2014 - ]: Procedure

1. Replace the millimeter wave radar sensor (Refer to Removal [08/2014 - ] ).

Result:  NEXT

NEXT 

Refer to  2

1. Adjust the millimeter wave radar sensor (Refer to Adjustment [08/2014 - ] ).

Result:  NEXT

NEXT 

Refer to  3

1. Using the Techstream, enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
2. Clear the DTCs (Refer to DTC Check / Clear [08/2014 - ] ).
3. Recheck for DTCs.

   OK

   DTC C1A10 is not output.

Result:  OK

OK 

END 

Result:  NG

NG 

REPLACE DRIVING SUPPORT ECU 

(Refer to Removal [08/2014 - ] )