How To Proceed With Troubleshooting [08/2014 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to NEXT Result: 1
NEXT
See step 2
- CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
Result
Proceed to NEXT Result: 1
NEXT
See step 3
- INSPECT AUXILIARY BATTERY VOLTAGE
- Measure the auxiliary battery voltage with the power switch off.
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
Result
Proceed to NEXT
Result: 1
NEXT
See step 4
- Measure the auxiliary battery voltage with the power switch off.
- PROBLEM SYMPTOMS TABLE
Result
Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B Result: 2
B
See step 6
Result: 1
A
See step 5
- OVERALL ANALYSIS AND TROUBLESHOOTING
- Terminals of ECU (See article. Refer to TERMINALS OF ECU [08/2014 - ] )
- Fail-safe chart (See article. Refer to FAIL-SAFE CHART [08/2014 - ] )
Result
Proceed to NEXT
Result: 1
NEXT
See step 6
- ADJUST, REPAIR OR REPLACE
Result
Proceed to NEXT Result: 1
NEXT
See step 7
- CONFIRMATION TEST
Result
Proceed to NEXT Result: 1
NEXT
END