LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> NX 200t Base, FWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> Initialization [05/2019 - ] >> Initialization [05/2019 - ]

Initialization [05/2019 - ]

  1. STEERING SENSOR ZERO POINT CALIBRATION 
    1. Start the engine.
    2. Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more.
    3. Turn the engine switch off.
scientia non olet · About LEMON Manuals