LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> NX 200t Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windows / Glass - Service Information >> Relay >> On-Vehicle Inspection [10/2014 - ] >> Procedure

On-Vehicle Inspection [10/2014 - ]: Procedure

  1. INSPECT FRONT WIPER DEICER RELAY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the front wiper deicer relay.

      GTY515508Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT DEFOGGER RELAY 
    GTY502736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 4 Battery voltage is not applied between terminals 1 and 2 Below 1 Ω
      Battery voltage is applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied between terminals 1 and 2 Below 1 Ω
      4 - 5 Always 10 kΩ or higher

      If the result is not as specified, replace the defogger relay.

scientia non olet · About LEMON Manuals