Reverse Shift-linked Function of Power Mirrors does not Operate [09/2015 - ]: Procedure

1. Check the memory and reactivation functions. Refer to OPERATION CHECK [09/2015 - ] .

   OK

   Memory and reactivation functions operate normally.

Result: 

NG 

GO TO OTHER DIAGNOSTIC PROCEDURE 

Refer to PROBLEM SYMPTOMS TABLE [09/2015 - ] )

Result: 

OK 

See step  2

1. Clear the DTCs. Refer to DTC CHECK / CLEAR [09/2015 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [09/2015 - ] .

   OK

   DTCs are not output.

Result: 

NG 

GO TO SFI SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

Result: 

OK 

See step  3

1. Check that the shift indicator of the combination meter assembly operates normally.

   OK

   Shift indicator of combination meter assembly operates normally.

Result: 

NG 

GO TO METER / GAUGE SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ] )

Result: 

OK 

See step  4

1. Check the malfunctioning pars.
   RESULT
   
   

   Result	Proceed to
   Both rear view mirror assembly LH and RH are malfunction	A
   Only rear view mirror assembly LH is malfunction	B
   Only rear view mirror assembly RH is malfunction	C

Result: 

A 

MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 

Refer to REMOVAL [09/2015 - ] )

Result: 

C 

See step  7

Result: 

B 

See step  5

1. Replace the outer rear view mirror assembly LH with a new or known good one. Refer to REMOVAL [09/2015 - ] .

Result: 

NEXT 

See step  6

1. Check the memory and reactivation functions. Refer to OPERATION CHECK [09/2015 - ] .

   OK

   Memory and reactivation functions operate normally.

Result: 

OK 

END (OUTER REAR VIEW MIRROR ASSEMBLY LH WAS DEFECTIVE) 

Result: 

NG 

REPLACE OUTER MIRROR CONTROL ECU ASSEMBLY LH 

Refer to REMOVAL [09/2015 - ] )

1. Replace the outer rear view mirror assembly RH with a new or known good one. Refer to REMOVAL [09/2015 - ] .

Result: 

NEXT 

See step  8

1. Check the memory and reactivation functions. Refer to OPERATION CHECK [09/2015 - ] .

   OK

   Memory and reactivation functions operate normally.

Result: 

OK 

END (REAR VIEW MIRROR ASSEMBLY RH WAS DEFECTIVE) 

Result: 

NG 

REPLACE OUTER MIRROR CONTROL ECU ASSEMBLY RH 

Refer to REMOVAL [09/2015 - ] )