How To Proceed With Troubleshooting [09/2015 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result
Result NEXT Result: 1
NEXT
Refer to 2
- CONFIRM PROBLEM SYMPTOMS
Result
Result NEXT Result: 1
NEXT
Refer to 3
- CUSTOMER PROBLEM ANALYSIS
- Check if the vehicle has been jump started due to a discharged auxiliary battery.
Result
Result Proceed to The vehicle has never been jump started. A The vehicle has been jump started due to a discharged auxiliary battery. B
Result: 2
B
GO TO ON-VEHICLE INSPECTION / CHECK AUXILIARY BATTERY VOLTAGE. Refer to ON-VEHICLE INSPECTION [09/2015 - ]
Result: 1
A
Refer to 4
- Check if the vehicle has been jump started due to a discharged auxiliary battery.
- CAN COMMUNICATION SYSTEM CHECK
- Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to the CAN communication system are displayed on the screen.
Result
Result Proceed to OK A NG B
Result: 2
B
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - ]
Result: 1
A
Refer to 5
- Using the Techstream, display the CAN Bus Check screen and check that all ECUs and sensors that are connected to the CAN communication system are displayed on the screen.
- CHECK FOR DTCS
Result
Result Proceed to DTC is not output A DTC is output B Result: 2
B
GO TO DTC CHART
Result: 1
A
Refer to 6
- ON-VEHICLE INSPECTION
Result
Result Proceed to Malfunctioning area has not been determined A Malfunctioning area has been determined B Result: 2
B
Refer to 8
Result: 1
A
Refer to 7
- CHECK FOR INTERMITTENT PROBLEMS
Result
Result NEXT Result: 1
NEXT
Refer to 8
- REPAIR OR REPLACE
Result
Result NEXT Result: 1
NEXT
END