Customize Parameters [09/2015 - ]: Procedure
- CUSTOMIZE INTUITIVE PARKING ASSIST SYSTEM
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the intuitive parking assist system on.
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Utility / Customize / Warning, Sensor or Display
- Select the setting by referring to the table below.WARNING
Display Default Contents Setting Relevant ECU Fr Sensor Onset Range Wide Function to set buzzer activation range (for front sensors) - Narrow or Wide
- Narrow: 600 mm (23.6 in.)
- Wide: 1000 mm (39.4 in.)
Clearance warning ECU Rr Sensor Onset Range Wide Function to set buzzer activation range (for rear sensors) - Narrow or Wide
- Narrow: 600 mm (23.6 in.)
- Wide: 1500 mm (59.1 in.)
Clearance warning ECU Keep Sense Buzzer Avail Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds - Not Avail or Avail
- Not Avail: Not Available
- Avail: Available
Clearance warning ECU Fr & Rr Buzzer Freq Middle Buzzer sounding frequency - Low, Middle or High
- Low: Buzzer frequency is low
- Middle: Buzzer frequency is middle
- High: Buzzer frequency is high
Clearance warning ECU Fr & Rr Buzzer Volume M2 Buzzer volume setting - L, M1, M2, M3 or H
- L: Low volume
- M1: Medium low volume
- M2: Medium volume
- M3: Medium high volume
- H: High volume
Clearance warning ECU Temporary Mute Reset Speed Adjust 20 km/h Sets the vehicle speed at which the temporary mute function resets. - System Link, 15 km/h, 20 km/h or 30 km/h
- System Link: Adjustment will be canceled when vehicle speed 15 km/h (9 mph) or more (when accelerating) or 10 km/h (6 mph) or more (when decelerating)
- 15 km/h: Adjustment will be canceled when vehicle speed reaches 15 km/h
- 20 km/h: Adjustment will be canceled when vehicle speed reaches 20 km/h
- 30 km/h: Adjustment will be canceled when vehicle speed reaches 30 km/h
Clearance warning ECU Temporary Mute Function ON Sets the availability of the temporary mute function. - OFF or ON
- OFF: Temporary Mute Function not operating
- ON: Temporary Mute Function operating
Clearance warning ECU SENSORDisplay Default Contents Setting Relevant ECU Sensor Condition N Avail Function to make sensors available when shift position is N - Not Avail or Avail
- Not Avail: Not Available
- Avail: Available
Clearance warning ECU Front Side Dist Sensor Long Function to set buzzer activation range (for front sensors) - Short or Long
- Short: short range detection
- Long: long range detection
Clearance warning ECU Reverse Range Front Sensor Fsde Operation setting for vehicle front sensors (front center, front corner, front side) when shift lever is in R position - F, Fs, Fc, Fsde or F Stop
- F: All front sensors are available
- Fs, Fc: Front side and front corner sensors are available
- Fsde: Front side sensors are available
- F Stop: All Front sensors are not available
Clearance warning ECU Non P/R Range Rear Sensor R Stop Operation setting for vehicle rear sensors (rear center, rear corner) when shift lever is in position other than P or R - R, Rcrn or R Stop
- R: All rear sensors are available
- Rcrn: Rear corner sensors are available
- R Stop: All rear sensors are not available
Clearance warning ECU DISPLAYDisplay Default Contents Setting Relevant ECU Approach Display OFF Avail Display when moving away from previously detected obstacle - Not Avail or Avail
- Not Avail: Not Available
- Avail: Available
Clearance warning ECU Display Mode All Display mode setting (when intuitive parking assist system is normal) - All or Undisp
- All: Display displays all sensors
- Undisp: Display does not display
Clearance warning ECU - Narrow or Wide
- Customizing with Accessory MeterNOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Turn the engine switch on (IG).
- Turn the intuitive parking assist system on.
- Enter the following menus: Setup / Vehicle / LEXUS Park Assist.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU Alert volume 3 Sets the buzzer activation range for the rear center sensors. - 1, 2, 3, 4 or 5
- 1: Low volume
- 2: Medium low volume
- 3: Medium volume
- 4: Medium high volume
- 5: High volume
Clearance warning ECU Display On The display mode setting (when the intuitive parking assist system is normal). On or Off Clearance warning ECU Distance Front Wide Sets the buzzer activation range for the front center sensors. - Narrow or Wide
- Narrow: 600 mm (23.6 in.)
- Wide: 1000 mm (39.4 in.)
Clearance warning ECU Distance Rear Wide Sets the buzzer activation range for the rear center sensors. - Narrow or Wide
- Narrow: 600 mm (23.6 in.)
- Wide: 1500 mm (59.1 in.)
Clearance warning ECU - 1, 2, 3, 4 or 5
- Customizing with the Techstream