LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> IS 200t Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> DTC Check / Clear [10/2016 - 09/2020] >> DTC Check / Clear [10/2016 - 09/2020]

DTC Check / Clear [10/2016 - 09/2020]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2016 - 10/2017] , or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2017 - 09/2018] , or refer to DIAGNOSTIC TROUBLE CODE CHART [09/2018 - 09/2020] 

      Body Electrical > Pre-Collision 2 > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.
    5. Clear the DTCs.

      Body Electrical > Pre-Collision 2 > Clear DTCs 

scientia non olet · About LEMON Manuals