LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> IS 200t Base >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Occupant Classification System - Diagnostics - Introduction >> Occupant Classification System >> Precaution [09/2020 - ] >> Precaution [09/2020 - ]

Precaution [09/2020 - ]

  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected:

    System See Procedure
    Lane Tracing Assist System Refer to INITIALIZATION [09/2020 - 11/2021] , or refer to INITIALIZATION [11/2021 - 09/2022] , or refer to INITIALIZATION [09/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]
    Parking Support Brake System
    Pre-collision System
    Parking Assist Monitor System
    Panoramic View Monitor System
    Air Conditioning System
  2. GENERAL PRECAUTION 

    Perform zero point calibration and sensitivity check if any of the following conditions occur: 

    • The occupant detection ECU is replaced.
    • Accessories (seatback tray, seat cover, etc.) are installed.
    • The front passenger seat is removed from the vehicle.
    • One of the bolts that is used to install the front passenger seat is removed and reinstalled.
    • The passenger airbag ON/OFF indicator ("ON") comes on when the front passenger seat is not occupied.
    • An occupant classification sensor collision detection DTC is output due to an accident or a collision.