Caution / Notice / Hint

NOTE:

The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [04/2013 - ]
If the power window regulator motor assembly (for rear RH door) has been replaced with a new one, initialize the power window control system.
Refer to INITIALIZATION [04/2013 - ]
Check that the window lock switch is off before performing the following procedure.
Inspect the fuses for circuits related to this system before performing the following procedure.
If the main body ECU (multiplex network body ECU) is replaced, refer to Registration.
Refer to REGISTRATION [04/2013 - 06/2014] , or refer to REGISTRATION [06/2014 - 08/2015] , or refer to REGISTRATION [08/2015 - 10/2017] , or refer to REGISTRATION [10/2017 - 09/2020] , or refer to REGISTRATION [09/2020 - 11/2021] , or refer to REGISTRATION [11/2021 - 09/2022] , or refer to REGISTRATION [09/2022 - ]