LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2016 >> CT 200h Base >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Heated Steering Wheel Controller >> Installation [08/2014 - ] >> Procedure

Installation [08/2014 - ]: Procedure

  1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY 
    1. Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.

      Torque: 0.8 N*m (9 kgf*cm, 7 in.*lbf) 

    2. Engage the clamp.
  2. INSTALL LOWER STEERING WHEEL BOSS COVER 

    See step  3

  3. INSTALL STEERING SHAKE DAMPER 

    See step  4

  4. INSTALL CRUISE CONTROL SWITCH WIRE 

    See step  5

  5. INSTALL CRUISE CONTROL SWITCH 

    Refer to PROCEDURE - Step 1

  6. INSTALL STEERING PAD SWITCH ASSEMBLY 

    See step  1

  7. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD 
  8. ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  9. INSTALL STEERING WHEEL ASSEMBLY 

    See step  10

  10. CHECK STEERING WHEEL CENTER POINT 
  11. INSTALL HORN BUTTON ASSEMBLY 

    (See article. Refer to INSTALLATION [08/2014 - ] )

scientia non olet · About LEMON Manuals