DTC B2090: Driving Support System Malfunction [10/2014 - ]: Procedure

CHECK FOR DTC

Enter the following menus: Body Electrical / Pre-Collision 2, Radar Cruise / Trouble Code.

Check for DTCs.

RESULT

Result	Proceed to
"Pre-Collision 2" or "Radar Cruise" DTC is not output	A
"Pre-Collision 2" or "Radar Cruise" DTC is output	B

B → GO TO RELEVANT FLOWCHART

A: Go to next step

CHECK FOR DTC
1. Enter the following menus: Body Electrical / Pre-Collision 1 / Trouble Code /
2. Select "Clear" and clear the data.
3. Recheck for DTCs.
  OK
  
  DTC B2090 is not output.
NG → See step 3

OK → See step 4
REPLACE SEAT BELT CONTROL ECU. Refer to REMOVAL [10/2014 - ]
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - ]