LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> IS 250C Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Column Assembly >> Disassembly [08/2013 - ] >> Disassembly [08/2013 - ]

Disassembly [08/2013 - ]

  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY 
    1. Using a center punch, mark the center of the 2 tapered-head bolts.
    2. Using a 3 to 4 mm (0.118 to 0.157 in.) diameter drill bit, drill a hole in each tapered-head bolt.
    3. Using a screw extractor, remove each tapered-head bolt and steering lock actuator assembly from the steering column assembly.
      Fig 1: Removing Tapered-Head Bolt
      GTY268816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Screw Extractor
  2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU  See step  3
scientia non olet · About LEMON Manuals