Customize Parameters [08/2013 - ]

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting.

Select the setting by referring to the table below.

DOOR LOCK

Display	Default	Content	Setting
Unlock/Park*1	ON	Function that unlocks all doors when the shift lever is moved to P from any position other than P while the engine switch is on (IG).	ON or OFF
All Unlock/Open-Close	OFF	Function that unlocks the other doors when the driver door is opened within approximately 45 seconds after the engine switch is turned off.	ON or OFF
Unlock Key Twice	ON	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.	ON or OFF
Auto Lock	OFF ON*1	Function that locks all doors when the vehicle speed reaches a certain level.	ON or OFF
Auto Lock/Shift*1	ON OFF*1	Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed.	ON or OFF

*1: w/o Occupant Classification System

ILLUMINATED ENTRY

Display	Default	Content	Setting
Lighting Time	15 s	Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the engine switch from off to on (ACC) or (IG).)	7.5 s, 15 s or 30 s