Customize Parameters [10/2016 - 09/2020]
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2020 Lexus IS 350, 2020 Lexus IS 300, 2019 Lexus IS 350, 2019 Lexus IS 300, and 2018 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZE LANE DEPARTURE ALERT SYSTEM NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Multi-information display
- Turn the engine switch on (IG).
- Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup
- Select the setting by referring to the table below.
- Change the settings of the lane departure alert system using the steering pad switch assembly.
HINT:
Each item is displayed on the "Setting" screen on the multi-information display.
LANE DEPARTURE ALERT SYSTEMDisplay Content Setting Default Steering Assist Steering control function On/Off On Alert Method of lane departure alert Steering vibrator/Buzzer Steering vibrator Warning Sensitivity Timing of lane departure alert High/Standard Standard Vehicle Sway Warning Vehicle sway warning function On/Off On Sway Sensitivity Sway warning sensitivity High/Standard/Low Standard