DTC C1581: Assist Map Number Un-Writing [10/2016 - 10/2017]: Procedure

1. Perform assist map writing.

   Refer to CALIBRATION [04/2013 - 09/2020]

   Chassis > EMPS > Utility 

   Tester Display
   Signal Check

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2016 - 09/2020]

   Chassis > EMPS > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1581 is output.	A
   DTC C1581 is not output.	B

   NOTE:

   DTC C1581 is cleared after the assist map is written.

Result: 

B 

END 

Result: 

A 

See step  2

1. Check for DTCs.

   Refer to DIAGNOSIS SYSTEM [10/2016 - 10/2017]

   Result

   Result	Proceed to
   CAN communication system DTCs are not output.	A
   CAN communication system DTCs are output.	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2016 - 09/2018] 

Result: 

A 

See step  3

1. Confirm if the related parts have the correct part number.

   Related Part	ECM
   	AVS ECU (Absorber control ECU) (w/ Adaptive Variable Suspension System)

   NOTE:

   When removing a related part to check it, be sure to follow the appropriate procedures and precautions.

   • ECM

     for 8AR-FTS: Refer to REMOVAL [08/2015 - ]

     for 2GR-FSE: Refer to REMOVAL [04/2013 - 10/2017]

   • AVS ECU (Absorber control ECU) (w/ Adaptive Variable Suspension System)

     Refer to REMOVAL [04/2013 - ]

   Result

   Result	Proceed to
   All of the related parts have the correct part number.	A
   Any of the related parts has an incorrect part number.	B

Result: 

B 

See step  5

Result: 

A 

See step  4

1. Select Health Check on the Techstream screen and check if system DTCs of the related parts are output.

   HINT: 

   If system DTCs of the related parts are stored, assist map writing to the power steering ECU assembly may not be performed properly.

   Result

   Result	Proceed to
   System DTCs of the related parts are output.	A
   System DTCs of the related parts are not output.	B

Result: 

A 

REPAIR CIRCUIT INDICATED BY OUTPUT CODE 

Result: 

B 

REPLACE POWER STEERING ECU ASSEMBLY. Refer to  REMOVAL [04/2013 - 09/2020] 

1. Replace the related parts with ones that have the correct part number.
   • ECM

     for 8AR-FTS: Refer to REMOVAL [08/2015 - ]

     for 2GR-FSE: Refer to REMOVAL [04/2013 - 10/2017]

   • AVS ECU (Absorber control ECU) (w/ Adaptive Variable Suspension System)

     Refer to REMOVAL [04/2013 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  6

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2016 - 09/2020]

   Chassis > EMPS > Trouble Codes 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result: 

A 

END 

Result: 

B 

REPLACE POWER STEERING ECU ASSEMBLY. Refer to  REMOVAL [04/2013 - 09/2020]