Display does not Dim when Light Control Switch is Turned ON [08/2013 - ]: Procedure
- CHECK IMAGE QUALITY SETTING
- Display the "Display" screen.
- Turn the light control switch to the tail or head position.
- Check if "Day Mode" on the display adjustment screen is on.RESULT
Result Proceed to "Day Mode" setting is on. A "Day Mode" setting is off. B
B → See step 2
A → TURN "Day Mode" SETTING OFF
- CHECK VEHICLE SIGNAL (OPERATION CHECK)
- Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check. Refer to OPERATION CHECK [08/2013 - ]
]
- Check that the display for "TAIL" changes between ON and OFF according to the headlight dimmer switch Assembly operation.
OK
Headlight Dimmer Switch Assembly Display Tail or head ON Off OFF HINT:
This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.
- Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.
OK
Headlight Dimmer Switch Assembly Display Tail or head DIM Off BRIGHT
NG → See step 3
OK → See step 4
- Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check. Refer to OPERATION CHECK [08/2013 - ]
]
- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ]
- REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY. Refer to REMOVAL [08/2013 - ]