LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Side Monitor System (Diagnostics) (Introduction) >> Side Monitor System >> Initialization [08/2013 - ] >> Initialization [08/2013 - ]

Initialization [08/2013 - ]

  1. INITIALIZE SIDE MONITOR SYSTEM 
    1. When "System initializing" is displayed on the multi-display assembly, correct the steering angle neutral point using the following method.
      1. Fully turn the steering wheel to the right and left on the flat ground.
        NOTE:

        Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, move the shift lever to P and make sure that the vehicle is not moving.

        HINT: 

        • The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.
        • If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in Calibration. Refer to CALIBRATION [08/2013 - ] .
scientia non olet · About LEMON Manuals