LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2015 >> GS 450h Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Crankshaft Position Sensor >> Removal [09/2014 - ] >> Procedure

Removal [09/2014 - ]: Procedure

  1. REMOVE COMPRESSOR WITH MOTOR ASSEMBLY 

    (See article. Refer to REMOVAL [09/2014 - 10/2015] Refer to REMOVAL [10/2015 - ] )

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
      GTY522242Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and crankshaft position sensor.
scientia non olet · About LEMON Manuals