How To Proceed With Troubleshooting [09/2014 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

1. Confirm the problem symptoms.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] or HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ]

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  3

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding.

Result

Result:  1

NEXT 

See step  4

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [09/2014 - 10/2015] or DIAGNOSIS SYSTEM [10/2015 - ]

   Result

   Result	Proceed to
   CAN DTC is not output.	A
   CAN DTC is output.	B

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015]  or  HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] 

Result:  1

A 

See step  5

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [09/2014 - ] 

   Result

   Result	Proceed to
   DTC is not output.	A
   DTC is output.	B

Result:  2

B 

Refer to  DIAGNOSTIC TROUBLE CODE CHART [09/2014 - ]  

Result:  1

A 

See step  6

1. Refer to Problem Symptoms Table.

   PROBLEM SYMPTOMS TABLE [09/2014 - ] 

   Result

   Result	Proceed to
   Problem symptom does not occur.	A
   Problem symptom occurs.	B

Result:  2

B 

See step  8

Result:  1

A 

See step  7

1. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [09/2014 - ] 

2. Terminals of ECU.

   Refer to TERMINALS OF ECU [09/2014 - 10/2015] or TERMINALS OF ECU [10/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

See step  9

Result

Result:  1

NEXT 

END