LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2014 >> ES 350 >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Occupant Classification System (Diagnostic Codes & Symptom Tests) >> Occupant Classification System >> DTC B1796: Sleep Operation Failure of Occupant Classification ECU [08/2013 - ] >> Procedure

DTC B1796: Sleep Operation Failure of Occupant Classification ECU [08/2013 - ]: Procedure

  1. REPLACE OCCUPANT DETECTION ECU 
    1. Turn the engine switch off.
    2. Disconnect the cable from the negative (-) battery terminal.
    3. Replace the occupant detection ECU. Refer to REMOVAL [08/2013 - ] .
    4. Connect the cable to the negative (-) battery terminal.

    NEXT: Go to next step 

  2. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK 
    1. Using the Techstream, perform Zero Point Calibration and Sensitivity Check. Refer to INITIALIZATION [08/2013 - ] .

    NEXT → END 

scientia non olet · About LEMON Manuals