DTC U0073/51: Control Module Communication Bus OFF; DTC U0100/53: Lost Communication with ECM/PCM; DTC U0124/55: Lost Communication with Lateral Acceleration Sensor Module; DTC U0129/52: Lost Communication with Brake System Control Module; DTC U0293/54: Lost Communication with HV ECU: Procedure

1. Turn the power switch OFF.
2. Connect the Techstream to the DLC3.
3. Turn the power switch ON (IG) and the Techstream on.
4. Clear the DTC. Refer to DTC CHECK / CLEAR [09/2012 - ] .
5. Turn the power switch OFF.
6. Turn the power switch ON (IG) and check for DTC.
   RESULT
   
   

   Result	Proceed to
   DTC is output	A
   DTC is not output	B

B → See step   2 

A → See step   3