LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> LS 460 Base, RWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column System (Service Information) >> Steering Wheel >> Installation [09/2012 - ] >> Installation [09/2012 - ]

Installation [09/2012 - ]

  1. INSTALL STEERING WHEEL ASSEMBLY 
    1. Align the matchmarks on the steering wheel assembly and steering main shaft assembly.
    2. Connect the connectors.
    3. Install the steering wheel assembly set nut.

      Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf) 

  2. INSTALL STEERING PAD ASSEMBLY 

    Refer to INSTALLATION [09/2012 - ]

  3. INSPECT STEERING PAD 

    Refer to ON-VEHICLE INSPECTION [09/2012 - ]

  4. INSPECT STEERING WHEEL CENTER POINT 
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  6. INSTALL COWL TOP VENTILATOR LOUVER RH  . Refer to INSTALLATION [09/2012 - ] - Step 15
  7. CHECK SRS WARNING LIGHT 

    Refer to DIAGNOSIS SYSTEM [09/2012 - ]

  8. PERFORM INITIALIZATION 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [09/2012 - ] .

scientia non olet · About LEMON Manuals