LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> LS 460 Base, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> VVT Relay >> On-Vehicle Inspection [09/2012 - ] >> On-Vehicle Inspection [09/2012 - ]

On-Vehicle Inspection [09/2012 - ]

  1. INSPECT VVT RELAY (VVT RH, VVT LH) 
    Fig 1: Relay Connector Terminal Identification
    GTY264765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 when no battery voltage is applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 when battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the VVT relay.

scientia non olet · About LEMON Manuals