Data List / Active Test [08/2012 - ]

Performing the ACTIVE TEST using Techstream allows the meters, indicators and so on to operate without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten labor time.

1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. From the display on the tester, select the "ACTIVE TEST".
   COMBINATION METER:
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Driver Side Seat Belt	Driver side seat belt indicator light	OFF/ON	Confirm that the vehicle is stopped with the engine idling
   Front Passenger side Seat Belt	Front passenger side seat belt indicator light	OFF/ON	Confirm that the vehicle is stopped with the engine idling