LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> IS 250C Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Engine Coolant Temperature Sensor >> Removal [08/2012 - ] >> Removal [08/2012 - ]

Removal [08/2012 - ]

  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL [08/2012 - ] .
  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
      Fig 1: Identifying Engine Coolant Temperature Sensor & Connector
      GTY104618Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the engine coolant temperature sensor.
    3. Remove the gasket from the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals