LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> IS 250C Base >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Smart Access System (Keyless Start) (Diagnostics - Introduction) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (For Start Function) >> DTC Check/Clear [08/2012 - ] >> DTC Check/Clear [08/2012 - ]

DTC Check/Clear [08/2012 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Read the DTC by following the prompts on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.
    5. Clear the DTC by following the directions on the Techstream screen.

      HINT: 

      Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals