Disc cannot be Ejected: Procedure
- CHECK OPERATION
- Press the disc eject switch of the multimedia module receiver assembly for 5 seconds or more and check that the disc is ejected.
OK
Disc is ejected.
NG → See step 3
OK: Go to next step
- Press the disc eject switch of the multimedia module receiver assembly for 5 seconds or more and check that the disc is ejected.
- REPLACE DISC AND RECHECK
- Replace the disc with a known good one and check that the malfunction disappears.
OK
Disc is ejected.
NG → See step 3
OK → DISC WAS FAULTY
- Replace the disc with a known good one and check that the malfunction disappears.
- REPLACE MULTIMEDIA MODULE RECEIVER ASSEMBLY. Refer to REMOVAL [08/2012 - ]