LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2013 >> IS 250 Base, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Mass Air Flow Meter >> Installation [08/2012 - ] >> Installation [08/2012 - ]

Installation [08/2012 - ]

  1. INSTALL MASS AIR FLOW METER 
    1. Install a new O-ring to the MAF meter.
    2. Install the MAF meter with the 2 screws.
      Fig 1: Identifying MAF Meter Screws
      GTY132444Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the MAF meter connector.
      Fig 2: Identifying MAF Meter Connector
      GTY101638Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE ROOM SIDE COVER RH  . Refer to INSTALLATION [08/2012 - ] - Step 116
  3. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION [08/2012 - ] - Step 117
scientia non olet · About LEMON Manuals