Inspection Procedure
NOTE:
- When using the Techstream with the engine switch off, perform either of the following: 1) Turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and vehicle begins, or 2) connect the Techstream to the vehicle, select the vehicle type under manual mode, and then enter the following menus: Body Electrical / Smart Access / Trouble Codes.
- After performing repairs, confirm that no DTCs are output again.
- When replacing the steering lock actuator assembly (steering lock ECU), registration must be performed. Refer to REGISTRATION [06/2012 - ] .
HINT:
When all the ECUs that are connected to the LIN communication cannot communicate with the certification ECU, DTC B2785 is stored.
HINT:
RELATED DATA LIST AND ACTIVE TEST ITEMS
| DTC | Data List Item | Active Test Item |
|---|---|---|
| B2781 | Smart Access
|
- |