Portable Player cannot be Connected Manually/Automatically: Procedure

1. Check if the portable player is registered as a connected device.
   NOTE:

   If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the handsfree system.

   RESULT
   
   

   Result	Proceed to
   The portable player is registered as a connected device	A
   The portable player is not registered as a connected device	B

B → REGISTER PORTABLE PLAYER AS CONNECTED DEVICE 

A: Go to next step 

1. Check the connection condition between the portable player and radio receiver assembly.

   HINT: 

   The portable player cannot be connected under any of the following conditions: 

   • The portable player is connected to another device.
   • The portable player is connected to the radio receiver using the handsfree function.
   • The radio receiver has cleared the portable player registration.
   • The portable player is off.
   RESULT
   
   

   Result	Proceed to
   The portable player cannot connect automatically	A
   The portable player cannot be connected manually	B

B → See step   4 

A: Go to next step 

1. Check the automatic connection settings of the "Bluetooth" audio.
   1. Turn the engine switch off.
   2. Turn the engine switch on (IG) or on (ACC).

      OK

      The portable player is automatically recognized by the radio receiver.

NG → CHANGE SETTING TO ALLOW PORTABLE PLAYER TO BE RECOGNIZED BY RADIO RECEIVER 

OK: Go to next step 

1. Check the status of the portable player.

   OK

   The portable player is in standby mode or connected to another device (headphones, etc.).

NG → SET PORTABLE PLAYER TO STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES, etc.) 

OK: Go to next step 

1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

   OK

   The portable player can be connected manually/automatically.

NG → PORTABLE PLAYER IS NOT COMPATIBLE 

OK: Go to next step 

1. Remove additional devices which use radio waves.
2. Check if the portable player can be connected manually/automatically.

   OK

   The portable player can be connected manually/automatically.

NG → See step   7 

OK → END