Reassembly [03/2012 - ]

NOTE:

When using a vise, do not overtighten it.

INSTALL MULTIPLEX TILT AND TELESCOPIC ECU See step 1
INSTALL STEERING LOCK ACTUATOR ASSEMBLY
HINT:

When replacing the steering lock actuator assembly, perform the key registration. Refer to REGISTRATION [03/2012 - ] .
1. Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.
2. Tighten the 2 tapered-head bolts until the bolt heads break off.
  
  Fig 1: Identifying Steering Lock Actuator Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002