Display Signal Circuit between Multi-display and Radio Receiver: Procedure

1. Check if the digital communication cable connectors between the multi-media module receiver assembly and the accessory meter assembly*1 or multi-display* 2 have any connection problems. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2011 - ] .
   1. *1: for 12.3 Inch
   2. *2: for 8 Inch
2. Check that the screen display is normal.

   OK

   Screen display is normal.

NG → See step   2 

OK → See step   3 

1. Replace the accessory meter assembly*1 or multi-display*2. Refer to REMOVAL [12/2011 - ] .
   1. *1: for 12.3 Inch
   2. *2: for 8 Inch
2. Check that the screen display is normal.

   OK

   Screen display is normal.

NG → See step   4 

OK → END (ACCESSORY METER ASSEMBLY OR MULTI-DISPLAY IS DEFECTIVE)