| Steering Angle Sensor Communication Stop Mode |
Either condition is met:
- "Spiral cable (Steering Angle Sensor)" is not displayed on the CAN Bus Check screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [06/2012 - ]
- Communication system DTCs (DTCs that start with U) that are output correspond to "Steering Angle Sensor Communication Stop Mode" in "DTC Combination Table". Refer to DIAGNOSIS SYSTEM [06/2012 - ]
|
- Steering sensor branch line or connector
- Power source circuit of steering sensor
- Steering sensor ground circuit
- Steering sensor
|