Oil Pump Relay: Installation: Installation

INSTALL OIL PUMP RELAY
1. Install the oil pump relay to the relay block.
  
  Fig 1: Locating Oil Pump Relay From Relay Block
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the relay box cover to the relay block.
  
  Fig 2: Locating Relay Box Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL POWER STEERING ECU . Refer to INSTALLATION - Step 1
INSTALL NO. 1 INVERTER RESERVOIR BRACKET . Refer to INSTALLATION - Step 2
INSTALL AIR CLEANER ASSEMBLY RH . Refer to INSTALLATION - Step 2
INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 4
INSTALL ENGINE ROOM SIDE COVER RH . Refer to INSTALLATION - Step 92
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
INSTALL BATTERY SERVICE HOLE COVER LH . Refer to INSTALLATION - Step 15
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY . Refer to INSTALLATION - Step 17