LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> LS 460L RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (Service Information) >> Fuel Relief Valve >> Installation >> Installation

Fuel Relief Valve: Installation: Installation

  1. INSTALL FUEL RELIEF VALVE ASSEMBLY 
    1. Install a new gasket to the relief valve.
      Fig 1: Identifying Relief Valve
      GTY101998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a 14 mm deep socket wrench, install the relief valve to the No. 2 delivery pipe.

      Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf) 

      NOTE:
      • Do not apply oil to the threads of the relief valve and delivery pipe.
      • Do not allow foreign matter to enter the pipe during the installation.
    3. Install the No. 1 fuel pipe.
    4. Connect the No. 3 fuel hose.
      Fig 2: Identifying No. 3 Fuel Hose
      GTY105311Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Fig 3: Identifying No. 1 Engine Cover
    GTY288211Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INTAKE MANIFOLD 
    1. Install the intake manifold. Refer to INSTALLATION .
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization. Refer to INITIALIZATION .
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  6. ADD ENGINE COOLANT  . Refer to REPLACEMENT - Step 6
  7. INSPECT FOR COOLANT LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
  8. INSPECT FOR FUEL LEAK  . Refer to ON-VEHICLE INSPECTION - Step 1
scientia non olet · About LEMON Manuals