Front Shock Absorber: Disposal: Disposal

DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH (for 2WD)
1. Fully extend the front shock absorber rod.
  
  Fig 1: Fully Extending Front Shocker Absorber Rod
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
  WARNING:
  Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
  
  NOTE:
  The gas is colorless, odorless and nonpoisonous.
DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH (for AWD)
1. Fully extend the front shock absorber rod.
  
  Fig 2: Disposing Of Front Shock Absorber Assembly (for AWD)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.
  WARNING:
  Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
  
  NOTE:
  The gas is colorless, odorless and nonpoisonous.