LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> LS 460L AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 13 (Lighting System (Service Information)) >> FOOTWELL Light >> Inspection >> Inspection

FOOTWELL Light: Inspection: Inspection

WARNING: This page is about a different car, the 2012 Lexus LS 460. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH 
    1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
      Fig 1: Identifying No. 1 Interior Illumination Light Assembly LH Connector Terminals
      GTY286520Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Tester Connection Specified Condition
      2 (+B) - 1 (GND) Interior illumination light illuminates
  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH 
    1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
      Fig 2: Identifying No. 1 Interior Illumination Light Assembly RH Connector Terminals
      GTY289602Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Tester Connection Specified Condition
      2 (+B) - 1 (GND) Interior illumination light illuminates
  3. INSPECT INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY 
    1. Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
      Fig 3: Identifying Interior Illumination Light Sub-Assembly Connector Terminal
      GTY289603Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      Tester Connection Specified Condition
      2 (+B) - 1 (GND) Interior illumination light illuminates
scientia non olet · About LEMON Manuals