LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> LS 460 AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System (Service Information) >> Purge Valve >> Installation >> Installation

Purge Valve: Installation: Installation

  1. INSTALL PURGE VSV 
    1. Install the purge VSV with the bolt.
      Fig 1: Identifying Purge VSV Connector
      GTY102527Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    2. Connect the 2 purge line hoses to the purge VSV.
    3. Connect the purge VSV connector.
  2. CONNECT ENGINE WIRE  . Refer to INSTALLATION - Step 5
  3. INSTALL AIR CLEANER CAP LH 
    1. Install the air cleaner cap LH.
  4. INSTALL AIR CLEANER CAP RH 
    1. Install the air cleaner cap RH.
  5. INSTALL INTAKE AIR CONNECTOR PIPE  . Refer to INSTALLATION - Step 2
  6. INSTALL NO. 1 AIR CLEANER INLET  . Refer to INSTALLATION - Step 3
  7. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 8
  8. INSTALL ENGINE ROOM SIDE COVER LH  . Refer to INSTALLATION - Step 103
  9. INSTALL ENGINE ROOM SIDE COVER RH  . Refer to INSTALLATION - Step 102
  10. INSTALL AIR CLEANER INLET COVER  . Refer to INSTALLATION - Step 7
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
  12. INSTALL COWL TOP VENTILATOR LOUVER RH  . Refer to INSTALLATION - Step 17
scientia non olet · About LEMON Manuals