LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> IS F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes (P0190-P060B)) >> SFI System >> DTC P0500: Vehicle Speed Sensor "A" >> Typical Enabling Conditions

Typical Enabling Conditions

Monitor runs whenever following DTCs not present None
Engine switch On (IG)
Time after engine switch off to on (IG) 3 seconds or more
Battery voltage 8 V or more
Starter Off
Either of the following conditions is met Condition 1 or 2
1. All of the following conditions are met Conditions A, B and C
A. Engine coolant temperature 20°C (68°F) or more
B. Engine coolant temperature sensor circuit fail (P0115, P0117, P0118, P0125) Not detected
C. Time after park/neutral position switch on to off 10 seconds or more
2. All of the following conditions are met Condition D and E
D. Either of the following condition is met Condition (a) or (b)
(a) Engine coolant temperature Less than 20°C (68°F)
(b) Engine coolant temperature sensor circuit fail (P0115, P0117, P0118, P0125) Detected
E. Time after park/neutral position switch on to off 30 seconds or more