LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> IS 350C >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt (Service Information) >> Child Restraint Seat Tether Anchor >> Installation >> Installation

Child Restraint Seat Tether Anchor: Installation: Installation

  1. INSTALL TETHER ANCHOR BRACKET SET 
    1. Install tether anchor bracket set with the bolt.
      Fig 1: Location of Tether Anchor Bracket Bolt
      GTY284333Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf) 

  2. INSTALL ROLL OVER GARNISH LH  See step  4
  3. INSTALL REAR PACKAGE TRAY END PLATE (for LH Side)  See step  3
  4. INSTALL FRONT PACKAGE TRAY TRIM BOARD  See step  7
  5. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY  . Refer to INSTALLATION - Step 2
  6. INSTALL PACKAGE TRAY TRIM GARNISH LH  . Refer to INSTALLATION - Step 6
  7. INSTALL PACKAGE TRAY TRIM GARNISH RH  . Refer to INSTALLATION - Step 5
  8. CONNECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY LH  See step  9
  9. CONNECT REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY RH  See step  10
  10. INSTALL REAR SEAT CUSHION ASSEMBLY LH  . Refer to INSTALLATION - Step 4
  11. INSTALL REAR SEAT CUSHION ASSEMBLY RH  . Refer to INSTALLATION - Step 3
  12. CLOSE METALTOP ROOF  . Refer to INSTALLATION - Step 20
scientia non olet · About LEMON Manuals