Injector Driver: Removal: Removal

REMOVE COOL AIR INTAKE DUCT SEAL . Refer to REMOVAL - Step 1
REMOVE NO. 1 INLET AIR CLEANER . Refer to REMOVAL - Step 19
REMOVE NO. 1 ENGINE COVER . Refer to REMOVAL - Step 81
REMOVE INJECTOR DRIVER
1. Move the lock lever in the direction indicated by the arrow to release the connector lock. Disconnect the 3 connectors with wire harness locks and the connector from the injector driver.
  
  Fig 1: Identifying Connector Lock Lever
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt, 2 nuts and injector driver.
  
  Fig 2: Location of Injector Driver Bolt And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Be careful not to drop or strike the injector driver.