Typical Malfunction Thresholds
FOR 2WD
| Both of the following conditions are met | - |
| Difference in fuel pressure between actual and target | Less than -5 MPa (-51.0 kgf/cm2 , -725 psi) |
| Actual discharge rate of high pressure fuel pump | 320 mm3 /st or more |
FOR AWD
| Either of the following conditions is met: | Condition A or B |
| A. Both of the following conditions are met while engine is not idling: | - |
| 1. Difference in fuel pressure between actual and target | Less than -5 MPa (-51.0 kgf/cm2 , -725 psi) |
| 2. Difference in discharge rate of high press fuel pump between actual and target | More than 100 mm3 /st |
| B. Both of the following conditions are met while engine is idling | - |
| 1. Difference in fuel pressure between actual and target | Less than -3 MPa (-30.6 kgf/cm2 , -435 psi) |
| 2. Difference in discharge rate of high press fuel pump between actual and target | More than 100 mm3 /st |