Cruise Control Main Switch: Removal: Removal
- PRECAUTION (w/ Navigation System for HDD) NOTE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal. Refer to PRECAUTION .
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- REMOVE LOWER NO. 3 STEERING WHEEL COVER . Refer to REMOVAL - Step 3
- REMOVE LOWER NO. 2 STEERING WHEEL COVER . Refer to REMOVAL - Step 4
- REMOVE STEERING PAD . Refer to REMOVAL - Step 5
- REMOVE CRUISE CONTROL MAIN SWITCH
- Disconnect the connector.
- Remove the 2 screws and the cruise control main switch.