Wiper Switch: Installation: Installation

INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.
  
  Fig 1: Installing Wiper Switch Assembly Connectors And Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 connectors.
INSTALL STEERING COLUMN COVER
1. Engage the 3 claws and 4 clips to install the upper steering column cover.
  
  Fig 2: Identifying Steering Column Upper Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Engage the 2 claws and install the lower steering column cover.
  
  Fig 3: Identifying Steering Column Cover Claws And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  Do not damage the tilt and telescopic switch.
3. Install the 3 screws.
CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
- Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
- Reset the auto away/return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS .