LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> HS 250h >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) >> Power Switch >> Removal >> Removal

Power Switch: Removal: Removal

  1. PRECAUTION (w/ Navigation System) 
    NOTE: After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT 
    1. Remove the luggage compartment floor mat.
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL  . Refer to REMOVAL - Step 3
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  . Refer to REMOVAL - Step 7
  5. REMOVE POWER SWITCH 
    1. Detach the 2 claws and remove the power switch.
      Fig 1: Identifying Power Switch
      GTY264715Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals