LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2012 >> HS 250h >> Repair and Diagnosis >> Electrical >> Gauges >> Meter/Gauge/Display (Diagnostics - Introduction) >> Meter/Gauge System >> Initialization >> Initialization

Meter/Gauge System: Initialization: Initialization

  1. MAINTENANCE REQUIRED REMINDER RESETTING PROCEDURE 

    HINT: 

    The ODO/TRIP change switch is located below the speedometer.

    1. Turn the power switch on (IG).
    2. Press the ODO/TRIP change switch until the TRIP A meter appears.
    3. Turn the power switch off.
    4. Turn the power switch on (IG) while pressing and holding the ODO/TRIP change switch. Hold the ODO/TRIP change switch until the following conditions are met and 5 seconds have elapsed.
      1. The TRIP A meter shows "000000".
      2. The master warning light illuminates.
      3. When "000000" disappears and the master warning light turns off, the resetting procedure is complete.
scientia non olet · About LEMON Manuals