LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> LX 570 >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System (Service Information) >> Vane Pump >> Installation >> Installation

Vane Pump: Installation: Installation

  1. INSTALL VANE PUMP ASSEMBLY 
    1. Install the vane pump with the 2 bolts.
      Fig 1: Identifying Vane Pump Bolts
      GTY139802Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

  2. CONNECT PRESSURE FEED TUBE 
    Fig 2: Locating Pressure Feed Tube Bolt
    GTY127343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Install a new gasket to the pressure feed tube.
    2. Connect the pressure feed tube with the union bolt.

      Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf) 

  3. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR 
    Fig 3: Locating Power Steering Oil Pressure Sensor Connector
    GTY139695Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the connector.
    2. Attach the wire harness clamp.
  4. CONNECT SUCTION HOSE 
    1. Connect the suction hose to the vane pump assembly with the clip.
      Fig 4: Locating Suction Hose Clip
      GTY139841Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL FAN & GENERATOR V BELT  . Refer to INSTALLATION - Step 1
  6. INSTALL AIR CLEANER ASSEMBLY  . Refer to INSTALLATION - Step 37
  7. INSTALL AIR CLEANER HOSE ASSEMBLY  . Refer to INSTALLATION - Step 10
  8. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 72
  9. INSTALL FRONT FENDER APRON SEAL FRONT RH  . Refer to INSTALLATION - Step 16
  10. INSTALL FRONT WHEEL RH  . Refer to INSTALLATION - Step 6
  11. ADD POWER STEERING FLUID 
  12. BLEED POWER STEERING FLUID  . Refer to ON-VEHICLE INSPECTION - Step 2
  13. INSPECT FOR POWER STEERING FLUID LEAK 
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals