Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- The power tilt and power telescopic steering column system uses the CAN communication system, so check its diagnostic system before proceeding to troubleshooting.
- If the problem still occurs when there is no abnormality in the related circuits, check the multiplex tilt and telescopic ECU and replace it if necessary.
POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
| Symptom | Suspected Area | See |
|---|---|---|
| Only manual switch does not operate | Tilt and telescopic manual switch circuit | Refer to Tilt and Telescopic Manual Switch Circuit |
| Headlight dimmer switch assembly (tilt and telescopic manual switch) | Refer to Tilt and Telescopic Manual Switch Circuit | |
| Only auto away/return function does not operate | Check customization status of auto away function using Techstream | Refer to CUSTOMIZE PARAMETERS |
| Actuator power source circuit | Refer to Actuator Power Source Circuit | |
| IG power source circuit | Refer to IG Power Source Circuit | |
| Only auto away function does not operate | Smart access system with push-button start (for start function) | Refer to PROBLEM SYMPTOMS TABLE |
| Multiplex tilt and telescopic ECU | Refer to TERMINALS OF ECU | |
| Only auto return function does not operate | Smart access system with push-button start (for start function) | Refer to PROBLEM SYMPTOMS TABLE |
| Multiplex tilt and telescopic ECU | Refer to TERMINALS OF ECU | |
| Only memory function does not operate | Seat memory switch | Refer to COMPONENTS |
| Multiplex tilt and telescopic ECU | Refer to TERMINALS OF ECU |