Display does not Dim when Light Control Switch is Turned ON (08/2010 - 08/2011): Procedure

1. Enter the display adjustment screen by pressing the "DISP" switch.
   Fig 1: Screen Display - DISP Switch

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Turn the light control switch to the tail position.
3. Check if "Day Mode" on the display adjustment is on.

   OK

   "Day Mode" is on.

   TEXT IN ILLUSTRATION
   
   

   *1

   Example:

NG → See step   2 

OK → TURN "Day Mode" SETTING OFF 

1. Display the "Vehicle Signal Check Mode" screen. Refer to OPERATION CHECK .
   Fig 2: Identifying Vehicle Signal Check Mode Screen Display

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Cover the automatic light control sensor on the instrument panel with a cloth.
3. Set the instrument panel light control to less than the maximum (to activate the dimmer function that works when the light control switch is in the TAIL position).
4. Check that the display changes between ON and OFF according to the light control switch operation.

   OK

   Light Control Switch Condition	Display Condition
   TAIL or HEAD	ON
   OFF	OFF

   HINT: 

   The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

NG → See step   4 

OK → See step   3